Rometa 1010: Automatic block making machine with 600 blocks/hour
Rometa 1010 installation for the production of blocks, ceiling blocks and pavers with static quality vibration. Easy assembly, fully automatic operation.
600 units/h
Capacity
60 kW
Power
950-1100 × 600 mm
Tray dimensions
5,100 kg
Machine weight
Description
The Rometa 1010 is a low-to-medium capacity, fully automatic installation with static quality, highly versatile. Easy assembly and operation.
Automatic tray feeding.
The 565/375-litre planetary mixer.
Its tray is 950-1100 × 600 mm.
The Rometa 1010 block machine can produce pieces such as blocks, ceiling blocks, pavers, kerbstones, and all kinds of pieces.
Performance and technical specifications
Output by piece type and the rest of the technical data.
Space and dimensions
| Required space (building) | ≈800 m² |
|---|---|
| Required space (yard) | ≈2,000 m² |
| Block height | 50–250 mm |
Mixer and aggregates
| Mixer capacity | 565 / 375 L |
|---|---|
| Mixer type | Planetary, 3 peripheral arms |
| Aggregate hopper capacity | Up to 20 m³ (1-2 hoppers) |
Other specifications
| Output: Blocks 40×20×20cm | 600 units/h |
|---|---|
| Output: Ceiling blocks 15cm | 700 units/h |
| Output: Pavers 20×10cm | 60 m²/h |
Available configurations
3 automation levels. Hover over the diagram markers to see each element.
Block machine, output table, elevator with forklift adapter
Manual palletizing
Drying area
Automatic Rometa 1010 machine
Pneumatic elevator
Material transport to the drying area by forklift
Final product output
Weighing, set of 2 hoppers
Electronic cement scale
Automatic 560-litre mixer
Electrical equipment control
Cement silo
Features & advantages
Key components of the installation.
- Structural chassis (120×120×8 mm) with non-stop vibration and speed variator (7.5 kW)
- Tray injector with speed adjustment according to the mould
- 11 kW hydraulic equipment with hydraulic mixer opening
- Double 70 mm columns
- 565/375 L planetary mixer with skip, interchangeable 12 mm bottoms and sides
- SCADA control system with visual monitoring and online assistance
- PLC with Lenze inverter technology
- 4 or 6-tray elevator depending on configuration, non-stop operation
- Fully automatic gantry-type palletizing, with all electric movements driven by frequency variator and its own motor-pump: 90-180° turn with gear wheel, 4-side clamping.
- Automatic, programmable aggregate weighing; cement weighing with load cells
What you can manufacture
Real pieces produced with this machine.
Compare with other models
Choose up to 3 models to compare with this machine, or go straight to their page.
| Specification | Rometa 1010 | Rometa 4050 | Rometa 2010 |
|---|---|---|---|
| Capacity | 600 units/h | 3,000 units/h | 900 units/h |
| Power | 60 kW | 180 kW | 80 kW |
| Tray dimensions | 950-1100 × 600 mm | 1400 × 1200 mm | 1200 × 600 mm |
| Machine weight | 5,100 kg | 22,000 kg (+4,000 kg with Face Mix) | 6,400 kg |
| Required space (building) | ≈800 m² | ≈1,500 m² | ≈800 m² |
| Mixer capacity | 565 / 375 L | 2,250 / 1,500 L | 565/375 L |
| Mixer type | Planetary, 3 peripheral arms | Planetary, 6 peripheral arms | Planetary, 3 peripheral arms |
Production capacity calculator
Tell us how many pieces (blocks or pavers) you need to produce and we'll recommend the right Rometa model.
Piece type
Frequently asked questions about this model
What raw materials are used to make concrete blocks?
Sand, gravel (aggregates), water and cement, with common gradings of 0-2 mm, 2-4 mm and 6-8 mm (maximum size around 8 mm) to achieve a balanced mix. Washed sand 0-3 mm, sand with fines 0-3 mm and fine gravel 3-8 mm can also be combined depending on the application. Correct dosing is key to the strength, durability and final finish of the piece.
How does a Rometa block plant work from start to finish?
Aggregates and cement are stored and mixed in set quantities (three aggregate gradings, cement and water) until a homogeneous mix is obtained, which the vibro-compactor doses into the mould on a wooden pallet. The machine vibrates the mould during filling and applies stronger vibration during compression to remove air from the mix. The pallet with the wet piece then goes to natural drying (24-48 hours, avoiding sun and wind) and, once dry, the piece is palletised onto a pallet while the wooden pallet is cleaned, turned and greased to go back to the machine.
How much production capacity does the Rometa 1010 have?
Up to 600 units/hour, with 60 kW of installed power. It's the entry-level plant in the Rometa range, designed for producing blocks, hollow-core blocks and pavers with simple assembly and fully automatic operation.
The present document has no contractual validity
Interested in the Rometa 1010?
Our technical team will advise you on the ideal configuration for your project, with no obligation.
Request a quote